QuantumFusion — your technology partner for working with white UHPC
At QuantumFusion, we understand that working with UHPC is more than just purchasing a material — it’s a complete process where every detail matters. That’s why we offer not only high-quality white UHPC mix, but also full technical support.
Our team helps set up production, adapt the mix design to your specific needs, train your staff, and ensure consistent quality at every stage. We’re with you from the first batch to full-scale production — so you get not just a product, but confidence in the result.
QuantumFusion — UHPC with intelligence, experience, and support.
$912.00
Add-on QuantumPERFORMANCE is used in concretes to improves the rheological properties of fresh concretes, use own raw materials.
Depending on the amount of product added, the flow properties of the fresh concrete can be significantly improved. As a result of the improved flow properties, up to 50% of the superplasticizer content can be saved, particularly in the case of UHPCs. Furthermore, the water content can be reduced due to the improved flow properties, which has a positive effect on the w/c ratio and the strength development. This makes it possible to save and reduce the cement content and thus the CO2 emissions of the concrete mix.
ADVANTAGE
TECHNICAL PARAMETERS
(YOUR Raw MATERIAL + ADD-on = UHPC)
| CO2 REDUCTION | 40% |
| PRIMARY ENERGY REDUCTION | 20% |
| REDUCE MATERIAL | Up 40% |
| REDUCE SUPERPLASTICIZER | Up 50% |
| QUALITY | Increased |
| POROSITY | Decreased |
| WORCABILITY | Stabilized |
| COMPRESSIVE STRENGTH | 150 MPa |
| FLEXURAL STRENGTH | 25 MPa |
| COLORE | White |
BASIC UHPC QuantumPERFORMANCE FOTRULATION
| Cement | CEM I 52,5 (N or R) | 600 to 800 kg/m3 |
| Quartz or limestone fines | 90 to 280 kg/m3 | |
| Quarty Fine Sand | 0.2 – 0.7 mm | 1000 to 1100 kg/m3 |
| Water | 185 to 195 kg/m3 | |
| Superplasticizer | PCM (fluid) | 35 kg/m3 |
| QuantumPERFORMANCE | 125 to 315 kg/m3 |
Option:
| Glass Fiders | 6 to 12 mm | 26.5 to 53 kg/m3 |
| Steel Fiders | 12 mm | 115 to 230 kg/m3 |
The product QuantumPERFORMANCE is used in concretes and influences the rheological properties of fresh concretes.
Depending on the amount of product added, the flow properties of the fresh concrete can be significantly improved. As a result of the improved flow properties, up to 50% of the superplasticizer content can be saved, particularly in the case of UHPCs. Furthermore, the water content can be reduced due to the improved flow properties, which has a positive effect on the w/c ratio and the strength development. This makes it possible to save and reduce the cement content and thus the CO2 emissions of the concrete mix.
With standard concretes, the addition of QuantumPERFORMANCE improves the fresh concrete stability and prevents the tendency to sedimentation or even bleeding.
A suitability test is recommended.
Add-on QuantumPERFORMANCE is used in concretes to improves the rheological properties of fresh concretes, use own raw materials.
Depending on the amount of product added, the flow properties of the fresh concrete can be significantly improved. As a result of the improved flow properties, up to 50% of the superplasticizer content can be saved, particularly in the case of UHPCs. Furthermore, the water content can be reduced due to the improved flow properties, which has a positive effect on the w/c ratio and the strength development. This makes it possible to save and reduce the cement content and thus the CO2 emissions of the concrete mix.
ADVANTAGE
TECHNICAL PARAMETERS
(YOUR Raw MATERIAL + ADD-on = UHPC)
| CO2 REDUCTION | 40% |
| PRIMARY ENERGY REDUCTION | 20% |
| REDUCE MATERIAL | Up 40% |
| REDUCE SUPERPLASTICIZER | Up 50% |
| QUALITY | Increased |
| POROSITY | Decreased |
| WORCABILITY | Stabilized |
| COMPRESSIVE STRENGTH | 150 MPa |
| FLEXURAL STRENGTH | 25 MPa |
| COLORE | White |
BASIC UHPC QuantumPERFORMANCE FOTRULATION
| Cement | CEM I 52,5 (N or R) | 600 to 800 kg/m3 |
| Quartz or limestone fines | 90 to 280 kg/m3 | |
| Quarty Fine Sand | 0.2 – 0.7 mm | 1000 to 1100 kg/m3 |
| Water | 185 to 195 kg/m3 | |
| Superplasticizer | PCM (fluid) | 35 kg/m3 |
| QuantumPERFORMANCE | 125 to 315 kg/m3 |
Option:
| Glass Fiders | 6 to 12 mm | 26.5 to 53 kg/m3 |
| Steel Fiders | 12 mm | 115 to 230 kg/m3 |
The product QuantumPERFORMANCE is used in concretes and influences the rheological properties of fresh concretes.
Depending on the amount of product added, the flow properties of the fresh concrete can be significantly improved. As a result of the improved flow properties, up to 50% of the superplasticizer content can be saved, particularly in the case of UHPCs. Furthermore, the water content can be reduced due to the improved flow properties, which has a positive effect on the w/c ratio and the strength development. This makes it possible to save and reduce the cement content and thus the CO2 emissions of the concrete mix.
With standard concretes, the addition of QuantumPERFORMANCE improves the fresh concrete stability and prevents the tendency to sedimentation or even bleeding.
A suitability test is recommended.
